Mercurial > hg > nginx-site
view xml/en/docs/mail/ngx_mail_core_module.xml @ 2490:b6f9da728570
Sorted methods alphabetically in njs Compatability.
author | Yaroslav Zhuravlev <yar@nginx.com> |
---|---|
date | Thu, 23 Jan 2020 18:19:29 +0000 |
parents | c8f0f30e1513 |
children | 468e6e14e5cc |
line wrap: on
line source
<?xml version="1.0"?> <!-- Copyright (C) 2006, 2007 Anton Yuzhaninov Copyright (C) Nginx, Inc. --> <!DOCTYPE module SYSTEM "../../../../dtd/module.dtd"> <module name="Module ngx_mail_core_module" link="/en/docs/mail/ngx_mail_core_module.html" lang="en" rev="14"> <section id="summary"> <para> This module is not built by default, it should be enabled with the <literal>--with-mail</literal> configuration parameter. </para> </section> <section id="example" name="Example Configuration"> <para> <example> worker_processes 1; error_log /var/log/nginx/error.log info; events { worker_connections 1024; } mail { server_name mail.example.com; auth_http localhost:9000/cgi-bin/nginxauth.cgi; imap_capabilities IMAP4rev1 UIDPLUS IDLE LITERAL+ QUOTA; pop3_auth plain apop cram-md5; pop3_capabilities LAST TOP USER PIPELINING UIDL; smtp_auth login plain cram-md5; smtp_capabilities "SIZE 10485760" ENHANCEDSTATUSCODES 8BITMIME DSN; xclient off; server { listen 25; protocol smtp; } server { listen 110; protocol pop3; proxy_pass_error_message on; } server { listen 143; protocol imap; } server { listen 587; protocol smtp; } } </example> </para> </section> <section id="directives" name="Directives"> <directive name="listen"> <syntax> <value>address</value>:<value>port</value> [<literal>ssl</literal>] [<literal>backlog</literal>=<value>number</value>] [<literal>rcvbuf</literal>=<value>size</value>] [<literal>sndbuf</literal>=<value>size</value>] [<literal>bind</literal>] [<literal>ipv6only</literal>=<literal>on</literal>|<literal>off</literal>] [<literal>so_keepalive</literal>=<literal>on</literal>|<literal>off</literal>|[<value>keepidle</value>]:[<value>keepintvl</value>]:[<value>keepcnt</value>]]</syntax> <default/> <context>server</context> <para> Sets the <value>address</value> and <value>port</value> for the socket on which the server will accept requests. It is possible to specify just the port. The address can also be a hostname, for example: <example> listen 127.0.0.1:110; listen *:110; listen 110; # same as *:110 listen localhost:110; </example> IPv6 addresses (0.7.58) are specified in square brackets: <example> listen [::1]:110; listen [::]:110; </example> UNIX-domain sockets (1.3.5) are specified with the “<literal>unix:</literal>” prefix: <example> listen unix:/var/run/nginx.sock; </example> </para> <para> Different servers must listen on different <value>address</value>:<value>port</value> pairs. </para> <para> The <literal>ssl</literal> parameter allows specifying that all connections accepted on this port should work in SSL mode. </para> <para> The <literal>listen</literal> directive can have several additional parameters specific to socket-related system calls. <list type="tag"> <tag-name> <literal>backlog</literal>=<value>number</value> </tag-name> <tag-desc> sets the <literal>backlog</literal> parameter in the <c-func>listen</c-func> call that limits the maximum length for the queue of pending connections (1.9.2). By default, <literal>backlog</literal> is set to -1 on FreeBSD, DragonFly BSD, and macOS, and to 511 on other platforms. </tag-desc> <tag-name> <literal>rcvbuf</literal>=<value>size</value> </tag-name> <tag-desc> sets the receive buffer size (the <c-def>SO_RCVBUF</c-def> option) for the listening socket (1.11.13). </tag-desc> <tag-name> <literal>sndbuf</literal>=<value>size</value> </tag-name> <tag-desc> sets the send buffer size (the <c-def>SO_SNDBUF</c-def> option) for the listening socket (1.11.13). </tag-desc> <tag-name> <literal>bind</literal> </tag-name> <tag-desc> this parameter instructs to make a separate <c-func>bind</c-func> call for a given address:port pair. The fact is that if there are several <literal>listen</literal> directives with the same port but different addresses, and one of the <literal>listen</literal> directives listens on all addresses for the given port (<literal>*:</literal><value>port</value>), nginx will <c-func>bind</c-func> only to <literal>*:</literal><value>port</value>. It should be noted that the <c-func>getsockname</c-func> system call will be made in this case to determine the address that accepted the connection. If the <literal>ipv6only</literal> or <literal>so_keepalive</literal> parameters are used then for a given <value>address</value>:<value>port</value> pair a separate <c-func>bind</c-func> call will always be made. </tag-desc> <tag-name> <literal>ipv6only</literal>=<literal>on</literal>|<literal>off</literal> </tag-name> <tag-desc> this parameter determines (via the <c-def>IPV6_V6ONLY</c-def> socket option) whether an IPv6 socket listening on a wildcard address <literal>[::]</literal> will accept only IPv6 connections or both IPv6 and IPv4 connections. This parameter is turned on by default. It can only be set once on start. </tag-desc> <tag-name> <literal>so_keepalive</literal>=<literal>on</literal>|<literal>off</literal>|[<value>keepidle</value>]:[<value>keepintvl</value>]:[<value>keepcnt</value>] </tag-name> <tag-desc> this parameter configures the “TCP keepalive” behavior for the listening socket. If this parameter is omitted then the operating system’s settings will be in effect for the socket. If it is set to the value “<literal>on</literal>”, the <c-def>SO_KEEPALIVE</c-def> option is turned on for the socket. If it is set to the value “<literal>off</literal>”, the <c-def>SO_KEEPALIVE</c-def> option is turned off for the socket. Some operating systems support setting of TCP keepalive parameters on a per-socket basis using the <c-def>TCP_KEEPIDLE</c-def>, <c-def>TCP_KEEPINTVL</c-def>, and <c-def>TCP_KEEPCNT</c-def> socket options. On such systems (currently, Linux 2.4+, NetBSD 5+, and FreeBSD 9.0-STABLE), they can be configured using the <value>keepidle</value>, <value>keepintvl</value>, and <value>keepcnt</value> parameters. One or two parameters may be omitted, in which case the system default setting for the corresponding socket option will be in effect. For example, <example>so_keepalive=30m::10</example> will set the idle timeout (<c-def>TCP_KEEPIDLE</c-def>) to 30 minutes, leave the probe interval (<c-def>TCP_KEEPINTVL</c-def>) at its system default, and set the probes count (<c-def>TCP_KEEPCNT</c-def>) to 10 probes. </tag-desc> </list> </para> </directive> <directive name="mail"> <syntax block="yes"/> <default/> <context>main</context> <para> Provides the configuration file context in which the mail server directives are specified. </para> </directive> <directive name="protocol"> <syntax> <literal>imap</literal> | <literal>pop3</literal> | <literal>smtp</literal></syntax> <default/> <context>server</context> <para> Sets the protocol for a proxied server. Supported protocols are <link doc="ngx_mail_imap_module.xml">IMAP</link>, <link doc="ngx_mail_pop3_module.xml">POP3</link>, and <link doc="ngx_mail_smtp_module.xml">SMTP</link>. </para> <para> If the directive is not set, the protocol can be detected automatically based on the well-known port specified in the <link id="listen"/> directive: <list type="bullet"> <listitem> <literal>imap</literal>: 143, 993 </listitem> <listitem> <literal>pop3</literal>: 110, 995 </listitem> <listitem> <literal>smtp</literal>: 25, 587, 465 </listitem> </list> </para> <para> Unnecessary protocols can be disabled using the <link doc="../configure.xml">configuration</link> parameters <literal>--without-mail_imap_module</literal>, <literal>--without-mail_pop3_module</literal>, and <literal>--without-mail_smtp_module</literal>. </para> </directive> <directive name="resolver"> <syntax> <value>address</value> ... [<literal>valid</literal>=<value>time</value>] [<literal>ipv6</literal>=<literal>on</literal>|<literal>off</literal>] [<literal>status_zone</literal>=<value>zone</value>]</syntax> <syntax><literal>off</literal></syntax> <default>off</default> <context>mail</context> <context>server</context> <para> Configures name servers used to find the client’s hostname to pass it to the <link doc="ngx_mail_auth_http_module.xml">authentication server</link>, and in the <link doc="ngx_mail_proxy_module.xml" id="xclient">XCLIENT</link> command when proxying SMTP. For example: <example> resolver 127.0.0.1 [::1]:5353; </example> The address can be specified as a domain name or IP address, with an optional port (1.3.1, 1.2.2). If port is not specified, the port 53 is used. Name servers are queried in a round-robin fashion. <note> Before version 1.1.7, only a single name server could be configured. Specifying name servers using IPv6 addresses is supported starting from versions 1.3.1 and 1.2.2. </note> </para> <para id="resolver_ipv6"> By default, nginx will look up both IPv4 and IPv6 addresses while resolving. If looking up of IPv6 addresses is not desired, the <literal>ipv6=off</literal> parameter can be specified. <note> Resolving of names into IPv6 addresses is supported starting from version 1.5.8. </note> </para> <para id="resolver_valid"> By default, nginx caches answers using the TTL value of a response. An optional <literal>valid</literal> parameter allows overriding it: <example> resolver 127.0.0.1 [::1]:5353 valid=30s; </example> <note> Before version 1.1.9, tuning of caching time was not possible, and nginx always cached answers for the duration of 5 minutes. </note> <note> To prevent DNS spoofing, it is recommended configuring DNS servers in a properly secured trusted local network. </note> </para> <para id="resolver_status_zone"> The optional <literal>status_zone</literal> parameter (1.17.1) enables <link doc="../http/ngx_http_api_module.xml" id="resolvers_">collection</link> of DNS server statistics of requests and responses in the specified <value>zone</value>. The parameter is available as part of our <commercial_version>commercial subscription</commercial_version>. </para> <para id="resolver_off"> The special value <literal>off</literal> disables resolving. </para> </directive> <directive name="resolver_timeout"> <syntax><value>time</value></syntax> <default>30s</default> <context>mail</context> <context>server</context> <para> Sets a timeout for DNS operations, for example: <example> resolver_timeout 5s; </example> </para> </directive> <directive name="server"> <syntax block="yes"/> <default/> <context>mail</context> <para> Sets the configuration for a server. </para> </directive> <directive name="server_name"> <syntax><value>name</value></syntax> <default>hostname</default> <context>mail</context> <context>server</context> <para> Sets the server name that is used: <list type="bullet"> <listitem> in the initial POP3/SMTP server greeting; </listitem> <listitem> in the salt during the SASL CRAM-MD5 authentication; </listitem> <listitem> in the <literal>EHLO</literal> command when connecting to the SMTP backend, if the passing of the <link doc="ngx_mail_proxy_module.xml" id="xclient">XCLIENT</link> command is enabled. </listitem> </list> </para> <para> If the directive is not specified, the machine’s hostname is used. </para> </directive> <directive name="timeout"> <syntax><value>time</value></syntax> <default>60s</default> <context>mail</context> <context>server</context> <para> Sets the timeout that is used before proxying to the backend starts. </para> </directive> </section> </module>