Mercurial > hg > nginx-site
view xml/en/docs/http/ngx_http_core_module.xml @ 62:89759c3c6ba2
A link to the recent Netcraft report updated.
author | Maxim Konovalov <maxim@nginx.com> |
---|---|
date | Fri, 07 Oct 2011 06:33:52 +0000 |
parents | 12f1de4539b4 |
children | f122a777a6de |
line wrap: on
line source
<?xml version="1.0"?> <!DOCTYPE module SYSTEM "../../../../dtd/module.dtd"> <module name="HTTP core module" link="/en/docs/http/ngx_http_core_module.html" lang="en"> <section id="directives" name="Directives"> <directive name="aio" appeared-in="0.8.11"> <syntax>aio <value>on</value> | <value>off</value> | <value>sendfile</value> </syntax> <default>aio off</default> <context>http</context> <context>server</context> <context>location</context> <para> Enables or disables the use of asynchronous file I/O (AIO) on FreeBSD and Linux. </para> <para> On FreeBSD, AIO is usable starting from FreeBSD 4.3. AIO can either be linked statically into a kernel: <example> options VFS_AIO </example> or loaded dynamically as a kernel loadable module: <example> kldload aio </example> </para> <para> In FreeBSD versions 5 and 6, enabling AIO statically, or dynamically when booting the kernel, will cause the entire networking subsystem to use the Giant lock that can impact overall performance negatively. This limitation has been removed in FreeBSD 6.4-STABLE in 2009, and in FreeBSD 7. However, starting from FreeBSD 5.3 it is possible to enable AIO without the penalty of running the networking subsystem under a Giant lock—for this to work, the AIO module needs to be loaded after the kernel has booted. In this case, the following message will appear in <pathname>/var/log/messages</pathname> <example> WARNING: Network stack Giant-free, but aio requires Giant. Consider adding 'options NET_WITH_GIANT' or setting debug.mpsafenet=0 </example> and can safely be ignored. <note> The requirement to use the Giant lock with AIO is related to the fact that FreeBSD supports asynchronous calls <c-func>aio_read</c-func> and <c-func>aio_write</c-func> when working with sockets. However, since nginx only uses AIO for disk I/O, no problems should arise. </note> </para> <para> For AIO to work, <link id="sendfile">sendfile</link> needs to be disabled: <example> location /video/ { sendfile off; aio on; output_buffers 1 64k; } </example> </para> <para> In addition, starting from FreeBSD 5.2.1 and nginx 0.8.12, AIO can also be used to pre-load data for <c-func>sendfile</c-func>: <example> location /video/ { sendfile on; tcp_nopush on; aio sendfile; } </example> In this configuration, <c-func>sendfile</c-func> is called with the <c-def>SF_NODISKIO</c-def> flag which causes it not to block on disk I/O and instead report back when the data are not in memory; nginx then initiates an asynchronous data load by reading one byte. The FreeBSD kernel then loads the first 128K bytes of a file into memory, however next reads will only load data in 16K chunks. This can be tuned using the <link id="read_ahead">read_ahead</link> directive. </para> <para> On Linux, AIO is usable starting from kernel version 2.6.22; plus, it is also necessary to enable <link id="directio">directio</link>, otherwise reading will be blocking: <example> location /video/ { aio on; directio 512; output_buffers 1 128k; } </example> </para> <para> On Linux, <link id="directio">directio</link> can only be used for reading blocks that are aligned on 512-byte boundaries (or 4K for XFS). Reading of unaligned file's end is still made in blocking mode. The same holds true for byte range requests, and for FLV requests not from the beginning of a file: reading of unaligned data at the beginning and end of a file will be blocking. There is no need to turn off <link id="sendfile">sendfile</link> explicitly as it is turned off automatically when <link id="directio">directio</link> is used. </para> </directive> <directive name="alias"> <syntax>alias <argument>path</argument></syntax> <default/> <context>location</context> <para> Defines a replacement for the specified location. For example, with the following configuration <example> location /i/ { alias /data/w3/images/; } </example> the request of <dq><code>/i/top.gif</code></dq> will be responded with the file <dq><pathname>/data/w3/images/top.gif</pathname></dq>. </para> <para> The <argument>path</argument> value can contain variables. </para> <para> If <code>alias</code> is used inside a location defined with a regular expression then such regular expression should contain captures and <code>alias</code> should refer to these captures (0.7.40), for example: <example> location ~ ^/users/(.+\.(?:gif|jpe?g|png))$ { alias /data/w3/images/$1; } </example> </para> <para> When location matches the last part of the directive's value: <example> location /images/ { alias /data/w3/images/; } </example> it is better to use the <link id="root">root</link> directive instead: <example> location /images/ { root /data/w3; } </example> </para> </directive> <directive name="client_body_in_file_only"> <syntax>client_body_in_file_only <value>on</value> | <value>clean</value> | <value>off</value> </syntax> <default>client_body_in_file_only off</default> <context>http</context> <context>server</context> <context>location</context> <para> Determines whether nginx should save the entire client request body into a file. This directive can be used during debugging, or when using the <var>$request_body_file</var> variable, or the <link doc="ngx_http_perl_module.xml" id="methods">$r->request_body_file</link> method of the module <link doc="ngx_http_perl_module.xml">ngx_http_perl_module</link>. </para> <para> When set to the value <value>on</value>, temporary files are not removed after request processing. </para> <para> The value <value>clean</value> will cause the temporary files left after request processing to be removed. </para> </directive> <directive name="client_body_in_single_buffer"> <syntax>client_body_in_single_buffer <value>on</value> | <value>off</value> </syntax> <default>client_body_in_single_buffer off</default> <context>http</context> <context>server</context> <context>location</context> <para> Determines whether nginx should save the entire client request body in a single buffer. The directive is recommended when using the <var>$request_body</var> variable, to save the number of copy operations involved. </para> </directive> <directive name="client_body_buffer_size"> <syntax>client_body_buffer_size <argument>size</argument></syntax> <default>client_body_buffer_size 8k/16k</default> <context>http</context> <context>server</context> <context>location</context> <para> Sets buffer size for reading client request body. In case request body is larger than the buffer, the whole body or only its part is written to a temporary file. <!-- ссылку на соотв. директивы про временные файлы? --> By default, buffer size is equal to two memory pages. This is 8K on x86, other 32-bit platforms, and x86-64. It is usually 16K on other 64-bit platforms. </para> </directive> <directive name="client_body_temp_path"> <syntax>client_body_temp_path <argument>path</argument> [<argument>level1</argument> [<argument>level2</argument> [<argument>level3</argument>]]] </syntax> <default>client_body_temp_path client_body_temp</default> <context>http</context> <context>server</context> <context>location</context> <para> Defines a directory for storing temporary files holding client request bodies. Up to three-level subdirectory hierarchy can be used underneath the specified directory. For example, in the following configuration <example> client_body_temp_path /spool/nginx/client_temp 1 2; </example> a temporary file might look like this: <example> /spool/nginx/client_temp/7/45/00000123457 </example> </para> </directive> <directive name="client_body_timeout"> <syntax>client_body_timeout <argument>time</argument></syntax> <default>client_body_timeout 60</default> <context>http</context> <context>server</context> <context>location</context> <para> Defines a timeout for reading client request body. A timeout is only set between two successive read operations, not for the transmission of the whole request body. If a client does not transmit anything within this time, the client error <http-status code="408" text="Request Time-out"/> is returned. </para> </directive> <directive name="client_header_buffer_size"> <syntax>client_header_buffer_size <argument>size</argument></syntax> <default>client_header_buffer_size 1k</default> <context>http</context> <context>server</context> <para> Sets buffer size for reading client request header. For most requests, a buffer of 1K bytes is enough. However, if a request includes long cookies, or comes from a WAP client, it may not fit into 1K. If a request line, or a request header field do not fit entirely into this buffer then larger buffers are allocated, configured by the <link id="large_client_header_buffers">large_client_header_buffers</link> directive. </para> </directive> <directive name="client_header_timeout"> <syntax>client_header_timeout <argument>time</argument></syntax> <default>client_header_timeout 60</default> <context>http</context> <context>server</context> <para> Defines a timeout for reading client request header. If a client does not transmit the entire header within this time, the client error <http-status code="408" text="Request Time-out"/> is returned. </para> </directive> <directive name="client_max_body_size"> <syntax>client_max_body_size <argument>size</argument></syntax> <default>client_max_body_size 1m</default> <context>http</context> <context>server</context> <context>location</context> <para> Sets the maximum allowed size of the client request body, specified in the <header>Content-Length</header> request header field. If it exceeds the configured value, the client error <http-status code="413" text="Request Entity Too Large"/> is returned. Please be aware that <link doc="/web/upload.xml">browsers cannot correctly display this error</link>. </para> </directive> <directive name="default_type"> <syntax>default_type <argument>mime-type</argument></syntax> <default>default_type text/plain</default> <context>http</context> <context>server</context> <context>location</context> <para> Defines a default MIME-type of a response. </para> </directive> <directive name="directio" appeared-in="0.7.7"> <syntax>directio <argument>size</argument> | <value>off</value></syntax> <default>directio off</default> <context>http</context> <context>server</context> <context>location</context> <para> Enables the use of the <c-def>O_DIRECT</c-def> flag (FreeBSD, Linux), the <c-def>F_NOCACHE</c-def> flag (Mac OS X), or the <c-func>directio</c-func> function (Solaris), when reading files that are larger than the specified <argument>size</argument>. It automatically disables (0.7.15) the use of <link id="sendfile">sendfile</link> for a given request. It could be useful for serving large files: <example> directio 4m; </example> or when using <link id="aio">aio</link> on Linux. </para> </directive> <directive name="directio_alignment" appeared-in="0.8.11"> <syntax>directio_alignment <argument>size</argument></syntax> <default>directio_alignment 512</default> <context>http</context> <context>server</context> <context>location</context> <para> Sets an alignment for <link id="directio">directio</link>. In most cases, a 512-byte alignment is enough, however, when using XFS under Linux, it needs to be increased to 4K. </para> </directive> <directive name="error_page"> <syntax>error_page <argument>code</argument> ... [<value>=</value>[<argument>response</argument>]] <argument>uri</argument> </syntax> <default/> <context>http</context> <context>server</context> <context>location</context> <context>if in location</context> <para> Defines the URI that will be shown for the specified errors. These directives are inherited from the previous level if and only if there are no <code>error_page</code> directives on the current level. A URI value can contain variables. </para> <para> Example: <example> error_page 404 /404.html; error_page 502 503 504 /50x.html; error_page 403 http://example.com/forbidden.html; </example> </para> <para> Furthermore, it is possible to change the response code to another, for example: <example> error_page 404 =200 /empty.gif; </example> </para> <para> If an error response is processed by a proxied server, or a FastCGI server, and the server may return different response codes (e.g., 200, 302, 401 or 404), it is possible to respond with a returned code: <example> error_page 404 = /404.php; </example> </para> <para> If there is no need to change URI during redirection it is possible to redirect error processing into a named location: <example> location / { error_page 404 = @fallback; } location @fallback { proxy_pass http://backend; } </example> </para> </directive> <directive name="if_modified_since" appeared-in="0.7.24"> <syntax>if_modified_since <value>off</value> | <value>exact</value> | <value>before</value> </syntax> <default>if_modified_since exact</default> <context>http</context> <context>server</context> <context>location</context> <para> Specifies how to compare modification time of a response with the time in the <header>If-Modified-Since</header> request header: <list type="tag"> <tag-name><value>off</value></tag-name> <tag-desc> the <header>If-Modified-Since</header> request header is ignored (0.7.34); </tag-desc> <tag-name><value>exact</value></tag-name> <tag-desc> exact match; </tag-desc> <tag-name><value>before</value></tag-name> <tag-desc> modification time of a response is less than or equal to the time in the <header>If-Modified-Since</header> request header. </tag-desc> </list> </para> </directive> <directive name="internal"> <syntax>internal</syntax> <default/> <context>location</context> <para> Specifies that a given location can only be used for internal requests. For external requests, the client error <http-status code="404" text="Not Found"/> is returned. Internal requests are the following: <list type="bullet"> <listitem> requests redirected by the <link id="error_page">error_page</link> directive; </listitem> <listitem> subrequests formed by the <command>include virtual</command> command of the module <link doc="ngx_http_ssi_module.xml">ngx_http_ssi_module</link>; </listitem> <listitem> requests changed by the <link doc="ngx_http_rewrite_module.xml" id="rewrite">rewrite</link> directive of the module <link doc="ngx_http_rewrite_module.xml">ngx_http_rewrite_module</link>. </listitem> </list> </para> <para> Example: <example> error_page 404 /404.html; location /404.html { internal; } </example> </para> </directive> <directive name="keepalive_requests" appeared-in="0.8.0"> <syntax>keepalive_requests <argument>number</argument></syntax> <default>keepalive_requests 100</default> <context>http</context> <context>server</context> <context>location</context> <para> Sets the maximum number of requests that can be made through one keep-alive connection. </para> </directive> <directive name="keepalive_timeout"> <syntax>keepalive_timeout <argument>time</argument> [<argument>time</argument>] </syntax> <default>keepalive_timeout 75</default> <context>http</context> <context>server</context> <context>location</context> <para> The first argument sets a timeout during which a keep-alive client connection will stay open on the server side. The optional second argument sets a value in the <dq><header>Keep-Alive: timeout=<argument>time</argument></header></dq> response header. Two arguments may differ. </para> <para> The <dq><header>Keep-Alive: timeout=</header></dq> is understood by Mozilla and Konqueror. MSIE will close keep-alive connection in about 60 seconds. </para> </directive> <directive name="large_client_header_buffers"> <syntax>large_client_header_buffers <argument>number size</argument></syntax> <default>large_client_header_buffers 4 4k/8k</default> <context>http</context> <context>server</context> <para> Sets the maximum <argument>number</argument> and <argument>size</argument> of buffers used when reading large client request headers. A request line cannot exceed the size of one buffer, or the client error <http-status code="414" text="Request-URI Too Large"/> is returned. A request header field cannot exceed the size of one buffer as well, or the client error <http-status code="400" text="Bad Request"/> is returned. Buffers are allocated only on demand. By default, the buffer size is equal to one memory page size. It is either 4K or 8K, platform dependent. If after the end of request processing a connection is transitioned into the keep-alive state, these buffers are freed. </para> </directive> <directive name="limit_except"> <syntax>limit_except <argument>method</argument> ... { ... }</syntax> <default/> <context>location</context> <para> Limits allowed HTTP methods inside a location. The GET method also implies the HEAD method. Access to other methods can be limited using the <link doc="ngx_http_access_module.xml">ngx_http_access_module</link> and <link doc="ngx_http_auth_basic_module.xml">ngx_http_auth_basic_module</link> modules directives: <example> limit_except GET { allow 192.168.1.0/32; deny all; } </example> Please note that this will limit access to all methods <emphasis>except</emphasis> GET and HEAD. </para> </directive> <directive name="limit_rate"> <syntax>limit_rate <argument>rate</argument></syntax> <default/> <context>http</context> <context>server</context> <context>location</context> <context>if in location</context> <para> Rate limits the transmission of a response to a client. The <argument>rate</argument> is specified in bytes per second. <!-- The smaller the rate, the more accurate will be the limitation. --> The limit is per connection, so if a single client opens 2 connections, an overall rate will be 2x more than specified. </para> <para> This directive is not applicable if one wants to rate limit a group of clients on the <link id="server">server</link> level. If that is the case, the desired limit can be specified in the <var>$limit_rate</var> variable: <example> server { if ($slow) { set $limit_rate 4k; } ... } </example> </para> </directive> <directive name="limit_rate_after" appeared-in="0.8.0"> <syntax>limit_rate_after <argument>size</argument></syntax> <default/> <context>http</context> <context>server</context> <context>location</context> <context>if in location</context> <para> Sets the initial amount after which the further transmission of a response to a client will be rate limited. </para> <para> Example: <example> location /flv/ { flv; limit_rate_after 500k; limit_rate 50k; } </example> </para> </directive> <directive name="listen"> <syntax>listen <argument>address</argument>[:<argument>port</argument>] [<parameter>default</parameter> | <parameter>default_server</parameter> [<parameter>backlog</parameter>=<argument>number</argument>] [<parameter>rcvbuf</parameter>=<argument>size</argument>] [<parameter>sndbuf</parameter>=<argument>size</argument>] [<parameter>accept_filter</parameter>=<argument>filter</argument>] [<parameter>deferred</parameter>] [<parameter>bind</parameter>] [<parameter>ipv6only</parameter>=<value>on</value>|<value>off</value>] [<parameter>ssl</parameter>]] </syntax> <syntax>listen <argument>port</argument> [<parameter>default</parameter> | <parameter>default_server</parameter> [<parameter>backlog</parameter>=<argument>number</argument>] [<parameter>rcvbuf</parameter>=<argument>size</argument>] [<parameter>sndbuf</parameter>=<argument>size</argument>] [<parameter>accept_filter</parameter>=<argument>filter</argument>] [<parameter>deferred</parameter>] [<parameter>bind</parameter>] [<parameter>ipv6only</parameter>=<value>on</value>|<value>off</value>] [<parameter>ssl</parameter>]] </syntax> <default>listen *:80 | *:8000</default> <context>server</context> <para> Sets an <argument>address</argument> and a <argument>port</argument>, on which the server will accept requests. Only one of <argument>address</argument> or <argument>port</argument> can be specified. An <argument>address</argument> may also be a hostname, for example: <example> listen 127.0.0.1:8000; listen 127.0.0.1; listen 8000; listen *:8000; listen localhost:8000; </example> IPv6 addresses (0.7.36) are specified in square brackets: <example> listen [::]:8000; listen [fe80::1]; </example> </para> <para> If only <argument>address</argument> is given, the port 80 is used. </para> <para> If directive is not present then either the <code>*:80</code> is used if nginx runs with superuser privileges, or <code>*:8000</code> otherwise. </para> <para> The <parameter>default</parameter> parameter, if present, will cause the server to become the default server for the specified <argument>address</argument>:<argument>port</argument> pair. If none of the directives have the <parameter>default</parameter> parameter then the first server with the <argument>address</argument>:<argument>port</argument> pair will be the default server for this pair. Starting from version 0.8.21 it is possible to use the <parameter>default_server</parameter> parameter. </para> <para> A <code>listen</code> directive which has the <parameter>default</parameter> parameter can have several additional parameters specific to system calls <c-func>listen</c-func> and <c-func>bind</c-func>. Starting from version 0.8.21, these parameters can be specified in any <code>listen</code> directive, but only once for the given <argument>address</argument>:<argument>port</argument> pair. <list type="tag"> <tag-name> <parameter>backlog</parameter>=<argument>number</argument> </tag-name> <tag-desc> sets the <parameter>backlog</parameter> parameter in the <c-func>listen</c-func> call. By default, <parameter>backlog</parameter> equals -1 on FreeBSD and 511 on other platforms. </tag-desc> <tag-name> <parameter>rcvbuf</parameter>=<argument>size</argument> </tag-name> <tag-desc> sets the <c-def>SO_RCVBUF</c-def> parameter for the listening socket. </tag-desc> <tag-name> <parameter>sndbuf</parameter>=<argument>size</argument> </tag-name> <tag-desc> sets the <c-def>SO_SNDBUF</c-def> parameter for the listening socket. </tag-desc> <tag-name> <parameter>accept_filter</parameter>=<argument>filter</argument> </tag-name> <tag-desc> sets the name of the accept filter. This works only on FreeBSD, acceptable values are <value>dataready</value> and <value>httpready</value>. On receipt of the <c-def>SIGHUP</c-def> signal, an accept filter can only be changed in recent versions of FreeBSD, starting from 6.0, 5.4-STABLE and 4.11-STABLE. </tag-desc> <tag-name> <parameter>deferred</parameter> </tag-name> <tag-desc> instructs to use a deferred <c-func>accept</c-func> on Linux using the <c-def>TCP_DEFER_ACCEPT</c-def> option. </tag-desc> <tag-name> <parameter>bind</parameter> </tag-name> <tag-desc> specifies to make a separate <c-func>bind</c-func> call for a given <argument>address</argument>:<argument>port</argument> pair. This is because nginx will only <c-func>bind</c-func> to <code>*</code>:<argument>port</argument> if there are several <code>listen</code> directives with the same port but different addresses, and one of the <code>listen</code> directives listens on all addresses for the given port (<code>*</code>:<argument>port</argument>). It should be noted that in this case a <c-func>getsockname</c-func> system call will be made to determine an address that accepted a connection. If parameters <parameter>backlog</parameter>, <parameter>rcvbuf</parameter>, <parameter>sndbuf</parameter>, <parameter>accept_filter</parameter>, or <parameter>deferred</parameter> are used then for a given <argument>address</argument>:<argument>port</argument> pair a separate <c-func>bind</c-func> call will always be made. </tag-desc> <tag-name> <parameter>ipv6only</parameter>=<value>on</value>|<value>off</value> </tag-name> <tag-desc> this parameter (0.7.42) sets the value of the <c-def>IPV6_V6ONLY</c-def> parameter for the listening socket. This parameter can only be set once on start. </tag-desc> <tag-name> <parameter>ssl</parameter> </tag-name> <tag-desc> this parameter (0.7.14) does not relate to system calls <c-func>listen</c-func> and <c-func>bind</c-func>, but allows to specify that all connections accepted on this port should work in the SSL mode. This allows for a more compact configuration for the server operating in both HTTP and HTTPS modes simultaneously. <example> listen 80; listen 443 default ssl; </example> </tag-desc> </list> </para> <para> Example: <example> listen 127.0.0.1 default accept_filter=dataready backlog=1024; </example> </para> </directive> <directive name="location"> <syntax>location [ <value>=</value> | <value>~</value> | <value>~*</value> | <value>^~</value> | <value>@</value> ] <argument>uri</argument> { ... }</syntax> <default/> <context>server</context> <!-- <context>location</context> --> <para> Sets a configuration based on a request URI. A location can either be defined by a prefix string, or by a regular expression. Regular expressions are specified by prepending them with the <dq><value>~*</value></dq> prefix (for case-insensitive matching), or with the <dq><value>~</value></dq> prefix (for case-sensitive matching). To find a location matching a given request, nginx first checks locations defined using the prefix strings (prefix locations). Amongst them, the most specific one is searched. Then regular expressions are checked, in the order of their appearance in a configuration file. A search terminates on the first match, and its corresponding configuration is used. If no match with a regular expression location is found then a configuration of the most specific prefix location is used. </para> <para> For case-insensitive operating systems such as Mac OS X and Cygwin, the string matching ignores a case (0.7.7). However, comparison is limited to one-byte locales. </para> <para> Regular expressions can contain captures (0.7.40) that can later be used in other directives. </para> <para> If the most specific prefix location has the <dq><value>^~</value></dq> prefix then regular expressions are not checked. </para> <para> Also, using the <dq><value>=</value></dq> prefix it is possible to define an exact match of URI and location. If an exact match is found, the search terminates. For example, if a <dq><code>/</code></dq> request happens frequently, defining <dq><code>location = /</code></dq> will speed up the processing of these requests, as search terminates right after the first comparison. </para> <para> In versions from 0.7.1 to 0.8.41, if a request matched the prefix location without the <dq><value>=</value></dq> and <dq><value>^~</value></dq> prefixes, the search also terminated and regular expressions were not checked. </para> <para> Let's illustrate the above by example: <example> location = / { [ configuration A ] } location / { [ configuration B ] } location ^~ /images/ { [ configuration C ] } location ~* \.(gif|jpg|jpeg)$ { [ configuration D ] } </example> The <dq><code>/</code></dq> request will match configuration A, the <dq><code>/documents/document.html</code></dq> request will match configuration B, the <dq><code>/images/1.gif</code></dq> request will match configuration C, and the <dq><code>/documents/1.jpg</code></dq> request will match configuration D. </para> <para> The <dq><value>@</value></dq> prefix defines a named location. Such a location is not used for a regular request processing, but instead used for request redirection. </para> <!-- <migration from="Apache" directive="Location" /> --> </directive> <directive name="log_not_found"> <syntax>log_not_found <value>on</value> | <value>off</value></syntax> <default>log_not_found on</default> <context>http</context> <context>server</context> <context>location</context> <para> Enables or disables logging of errors about not found files into the <link doc="../ngx_core_module.xml" id="error_log">error_log</link>. </para> </directive> <directive name="log_subrequest"> <syntax>log_subrequest <value>on</value> | <value>off</value></syntax> <default>log_subrequest off</default> <context>http</context> <context>server</context> <context>location</context> <para> Enables or disables logging of subrequests into the <link doc="ngx_http_log_module.xml" id="access_log">access_log</link>. </para> </directive> <directive name="merge_slashes"> <syntax>merge_slashes <value>on</value> | <value>off</value></syntax> <default>merge_slashes on</default> <context>http</context> <context>server</context> <para> Enables or disables compression of two or more adjacent slashes in a URI into a single slash. </para> <para> Note that compression is essential for the correct prefix string and regular expressions location matching. Without it, the <dq><code>//scripts/one.php</code></dq> request would not match <example> location /scripts/ { ... } </example> and might be processed as a static file, so it gets converted to <dq><code>/scripts/one.php</code></dq>. </para> <para> Turning the compression <value>off</value> can become necessary if a URI contains base64-encoded names, since base64 uses the "/" character internally. However, for security considerations, it is better to avoid turning off the compression. </para> <para> If a directive is specified on the <link id="server">server</link> level, which is also a default server, its value will cover all virtual servers listening on the same address and port. </para> </directive> <directive name="msie_padding"> <syntax>msie_padding <value>on</value> | <value>off</value></syntax> <default>msie_padding on</default> <context>http</context> <context>server</context> <context>location</context> <para> Enables or disables adding of comments to responses with status greater than 400 for MSIE clients, to pad the response size to 512 bytes. </para> </directive> <directive name="msie_refresh"> <syntax>msie_refresh <value>on</value> | <value>off</value></syntax> <default>msie_refresh off</default> <context>http</context> <context>server</context> <context>location</context> <para> Enables or disables issuing refreshes instead of redirects, for MSIE clients. </para> </directive> <directive name="open_file_cache"> <syntax>open_file_cache <parameter>max</parameter>=<argument>N</argument> [<parameter>inactive</parameter>=<argument>time</argument>] | <value>off</value> </syntax> <default>open_file_cache off</default> <context>http</context> <context>server</context> <context>location</context> <para> Configures a cache that can store: <list type="bullet"> <listitem> open file descriptors, their sizes and modification times; </listitem> <listitem> directory lookups; </listitem> <listitem> file lookup errors, such as "file not found", "no read permission", and so on. Caching of errors should be enabled separately by the <link id="open_file_cache_errors">open_file_cache_errors</link> directive. </listitem> </list> </para> <para> The directive has the following parameters: <list type="tag"> <tag-name> <parameter>max</parameter> </tag-name> <tag-desc> sets the maximum number of elements in the cache; on cache overflow the least recently used (LRU) elements get removed; </tag-desc> <tag-name> <parameter>inactive</parameter> </tag-name> <tag-desc> defines a time, after which the element gets removed from the cache if there were no accesses to it during this time; by default, it is 60 seconds; </tag-desc> <tag-name> <value>off</value> </tag-name> <tag-desc> disables the cache. </tag-desc> </list> </para> <para> Example: <example> open_file_cache max=1000 inactive=20s; open_file_cache_valid 30s; open_file_cache_min_uses 2; open_file_cache_errors on; <!-- open_file_cache_events on; --> </example> </para> </directive> <directive name="open_file_cache_errors"> <syntax>open_file_cache_errors <value>on</value> | <value>off</value></syntax> <default>open_file_cache_errors off</default> <context>http</context> <context>server</context> <context>location</context> <para> Enables or disables caching of file lookup errors by the <link id="open_file_cache">open_file_cache</link>. </para> </directive> <!-- <directive name="open_file_cache_events"> <syntax>open_file_cache_events <value>on</value> | <value>off</value></syntax> <default>open_file_cache_events off</default> <context>http</context> <context>server</context> <context>location</context> <para> Enables to use kernel events to validate <link id="open_file_cache">open_file_cache</link> elements. This directive works with the <link doc="../events.xml" id="kqueue">kqueue</link> method only. Note that only NetBSD 2.0+ and FreeBSD 6.0+ support events for arbitrary file system types. Other operating systems support events only for essential file systems such as UFS or FFS. </para> </directive> --> <directive name="open_file_cache_min_uses"> <syntax>open_file_cache_min_uses <argument>number</argument></syntax> <default>open_file_cache_min_uses 1</default> <context>http</context> <context>server</context> <context>location</context> <para> Sets the minimum <argument>number</argument> of file accesses during the period configured by the <parameter>inactive</parameter> parameter of the <link id="open_file_cache">open_file_cache</link> directive, after which a file descriptor will remain open in the cache. </para> </directive> <directive name="open_file_cache_valid"> <syntax>open_file_cache_valid <argument>time</argument></syntax> <default>open_file_cache_valid 60</default> <context>http</context> <context>server</context> <context>location</context> <para> Sets a time after which <link id="open_file_cache">open_file_cache</link> elements should be validated. <!-- When <link id="open_file_cache_events">open_file_cache_events</link> is enabled, open file descriptors are checked only once, and then updated right after they get changed. --> </para> </directive> <directive name="optimize_server_names"> <syntax>optimize_server_names <value>on</value> | <value>off</value></syntax> <default>optimize_server_names on</default> <context>http</context> <context>server</context> <para> This directive is obsolete. </para> <para> Enables or disables optimization of hostname checking in name-based virtual servers. In particular, the checking affects hostnames used in redirects. If optimization is enabled, and all name-based servers listening on the same address:port pair have identical configuration, then names are not checked during request processing, and the first server name is used in redirects. In case redirects should use hostnames sent by clients, optimization needs to be disabled. </para> </directive> <directive name="port_in_redirect"> <syntax>port_in_redirect <value>on</value> | <value>off</value></syntax> <default>port_in_redirect on</default> <context>http</context> <context>server</context> <context>location</context> <para> Enables or disables specifying the port in redirects issued by nginx. </para> </directive> <directive name="read_ahead"> <syntax>read_ahead <argument>size</argument></syntax> <default>read_ahead 0</default> <context>http</context> <context>server</context> <context>location</context> <para> Sets the amount of pre-reading when working with files, in the kernel. </para> <para> On Linux, the <code>posix_fadvise(0, 0, 0, POSIX_FADV_SEQUENTIAL)</code> system call is used, so the <argument>size</argument> argument is ignored. </para> <para> On FreeBSD, the <code>fcntl(O_READAHEAD,</code><argument>size</argument><code>)</code> system call is used, supported in FreeBSD 9.0-CURRENT. FreeBSD 7 needs to be <link url="http://sysoev.ru/freebsd/patch.readahead.txt">patched</link>. </para> </directive> <directive name="recursive_error_pages"> <syntax>recursive_error_pages <value>on</value> | <value>off</value></syntax> <default>recursive_error_pages off</default> <context>http</context> <context>server</context> <context>location</context> <para> Enables or disables doing several redirects using the <link id="error_page">error_page</link> directive. </para> </directive> <directive name="reset_timedout_connection"> <syntax>reset_timedout_connection <value>on</value> | <value>off</value></syntax> <default>reset_timedout_connection off</default> <context>http</context> <context>server</context> <context>location</context> <para> Enables or disables resetting of timed out connections. The reset is performed as follows: before closing a socket, the <c-def>SO_LINGER</c-def> option is set on it with a timeout value of 0. When the socket is closed, a client is sent TCP RST, and all memory occupied by this socket is freed. This avoids keeping of an already closed socket with filled buffers for a long time, in a FIN_WAIT1 state. </para> <para> It should be noted that timed out keep-alive connections are still closed normally. </para> </directive> <directive name="resolver"> <syntax>resolver <argument>address</argument></syntax> <default/> <context>http</context> <context>server</context> <context>location</context> <para> Sets the <argument>address</argument> of a name server, for example: <example> resolver 127.0.0.1; </example> </para> </directive> <directive name="resolver_timeout"> <syntax>resolver_timeout <argument>time</argument></syntax> <default>resolver_timeout 30s</default> <context>http</context> <context>server</context> <context>location</context> <para> Sets a timeout for name resolution, for example: <example> resolver_timeout 5s; </example> </para> </directive> <directive name="root"> <syntax>root <argument>path</argument></syntax> <default>root html</default> <context>http</context> <context>server</context> <context>location</context> <context>if in location</context> <para> Sets the root directory for requests. For example, with the following configuration <example> location /i/ { root /data/w3; } </example> <dq><code>/i/top.gif</code></dq> will be responded with the file <dq><pathname>/data/w3/i/top.gif</pathname></dq>. </para> <para> The <argument>path</argument> value can contain variables. </para> <para> A path to the file is constructed by merely adding a URI to the value of the <code>root</code> directive. If a URI need to be modified, the <link id="alias">alias</link> directive should be used. </para> </directive> <directive name="satisfy"> <syntax>satisfy <value>all</value> | <value>any</value></syntax> <default>satisfy all</default> <context>location</context> <para> Allows access if any of the <link doc="ngx_http_access_module.xml">ngx_http_access_module</link> or <link doc="ngx_http_auth_basic_module.xml">ngx_http_auth_basic_module</link> modules grant access. <example> location / { satisfy any; allow 192.168.1.0/32; deny all; auth_basic "closed site"; auth_basic_user_file conf/htpasswd; } </example> </para> </directive> <directive name="satisfy_any"> <syntax>satisfy_any <value>on</value> | <value>off</value></syntax> <default>satisfy_any off</default> <context>location</context> <para> This directive was renamed to the <link id="satisfy">satisfy</link> directive. </para> </directive> <directive name="send_timeout"> <syntax>send_timeout <argument>time</argument></syntax> <default>send_timeout 60</default> <context>http</context> <context>server</context> <context>location</context> <para> Sets a timeout for transmitting a response to the client. A timeout is only set between two successive write operations, not for the transmission of the whole response. If a client does not receive anything within this time, a connection is closed. </para> </directive> <directive name="sendfile"> <syntax>sendfile <value>on</value> | <value>off</value></syntax> <default>sendfile off</default> <context>http</context> <context>server</context> <context>location</context> <para> Enables or disables the use of <c-func>sendfile</c-func>. </para> </directive> <directive name="server"> <syntax>server { ... }</syntax> <default/> <context>http</context> <para> Sets a configuration for the virtual server. There is no clean separation between IP-based (based on the IP address) and name-based (based on the <header>Host</header> request header field) virtual servers. Instead, the <link id="listen">listen</link> directives describe all addresses and ports that should accept connections for a server, and the <link id="server_name">server_name</link> directive lists all server names. An example configuration is provided in the <link doc="../virtual_hosts.xml"> Setting Up Virtual Servers</link> document. </para> </directive> <directive name="server_name"> <syntax>server_name <argument>name</argument> ...</syntax> <default>server_name hostname</default> <context>server</context> <para> Sets names of the virtual server, for example: <example> server { server_name example.com www.example.com; } </example> </para> <para> The first name becomes a primary server name. By default, the machine's hostname is used. Server names can include an asterisk (<dq><code>*</code></dq>) to replace the first or last part of a name: <example> server { server_name example.com *.example.com www.example.*; } </example> </para> <para> The first two of the above mentioned names can be combined: <example> server { server_name .example.com; } </example> </para> <para> It is also possible to use regular expressions in server names, prepending the name with a tilde (<dq><code>~</code></dq>): <example> server { server_name www.example.com ~^www\d+\.example\.com$; } </example> </para> <para> Regular expressions can contain captures (0.7.40) that can later be used in other directives: <example> server { server_name ~^(www\.)?(.+)$; location / { root /sites/$2; } } server { server_name _; location / { root /sites/default; } } </example> </para> <para> Starting from version 0.8.25, named captures in regular expressions create variables that can later be used in other directives: <example> server { server_name ~^(www\.)?(?<domain>.+)$; location / { root /sites/$domain; } } server { server_name _; location / { root /sites/default; } } </example> </para> <para> Starting from version 0.7.11, it is possible to specify an empty name: <example> server { server_name www.example.com ""; } </example> It allows this server to process requests without the <header>Host</header> header, instead of the default server for the given address:port pair. </para> <para> The name checking order is as follows: <list type="enum"> <listitem> full names </listitem> <listitem> names with the prefix mask, e.g. <dq><code>*.example.com</code></dq> </listitem> <listitem> names with the suffix mask, e.g. <dq><code>mail.*</code></dq> </listitem> <listitem> regular expressions </listitem> </list> </para> </directive> <directive name="server_name_in_redirect"> <syntax>server_name_in_redirect <value>on</value> | <value>off</value></syntax> <default>server_name_in_redirect on</default> <context>http</context> <context>server</context> <context>location</context> <para> Enables or disables the use of the primary server name, specified by the <link id="server_name">server_name</link> directive, in redirects issued by nginx. When disabled, the name from the <header>Host</header> request header field is used. If this field is not present, an IP address of the server is used. </para> </directive> <directive name="server_names_hash_max_size"> <syntax>server_names_hash_max_size <argument>size</argument></syntax> <default>server_names_hash_max_size 512</default> <context>http</context> <para> Sets the maximum <argument>size</argument> of the server names hash tables. For more information, please refer to <link doc="../hash.xml">Setting Up Hashes</link>. </para> </directive> <directive name="server_names_hash_bucket_size"> <syntax>server_names_hash_bucket_size <argument>size</argument></syntax> <default>server_names_hash_bucket_size 32/64/128</default> <context>http</context> <para> Sets the bucket size for the server names hash tables. Default value depends on the size of the processor's cache line. For more information, please refer to <link doc="../hash.xml">Setting Up Hashes</link>. </para> </directive> <directive name="server_tokens"> <syntax>server_tokens <value>on</value> | <value>off</value></syntax> <default>server_tokens on</default> <context>http</context> <context>server</context> <context>location</context> <para> Enables or disables emitting of nginx version in error messages and in the <header>Server</header> response header field. </para> </directive> <directive name="tcp_nodelay"> <syntax>tcp_nodelay <value>on</value> | <value>off</value></syntax> <default>tcp_nodelay on</default> <context>http</context> <context>server</context> <context>location</context> <para> Enables or disables the use of the <c-def>TCP_NODELAY</c-def> option. The option is enabled only when a connection is transitioned into the keep-alive state. </para> </directive> <directive name="tcp_nopush"> <syntax>tcp_nopush <value>on</value> | <value>off</value></syntax> <default>tcp_nopush off</default> <context>http</context> <context>server</context> <context>location</context> <para> Enables or disables the use of the <c-def>TCP_NOPUSH</c-def> socket option on FreeBSD or the <c-def>TCP_CORK</c-def> socket option on Linux. Opitons are enables only when <link id="sendfile">sendfile</link> is used. Enabling the option allows to <list type="bullet"> <listitem> send the response header and the beginning of a file in one packet, on Linux and FreeBSD 4.*; </listitem> <listitem> send a file in full packets. </listitem> </list> </para> </directive> <directive name="try_files"> <syntax>try_files <argument>file</argument> ... <argument>uri</argument> </syntax> <syntax>try_files <argument>file</argument> ... =<argument>code</argument> </syntax> <default/> <context>location</context> <para> Checks the existence of files in the specified order, and uses the first found file for request processing; the processing is performed in this location's context. It is possible to check the directory existence by specifying the slash at the end of a name, e.g. <dq><code>$uri/</code></dq>. If none of the files were found, an internal redirect to the <argument>uri</argument> specified by the last argument is made. As of version 0.7.51, the last argument can also be a <argument>code</argument>: <example> location / { try_files $uri $uri/index.html $uri.html =404; } </example> </para> <para> Example when proxying Mongrel: <example> location / { try_files /system/maintenance.html $uri $uri/index.html $uri.html @mongrel; } location @mongrel { proxy_pass http://mongrel; } </example> </para> <para> Example for Drupal/FastCGI: <example> location / { try_files $uri $uri/ @drupal; } location ~ \.php$ { try_files $uri @drupal; fastcgi_pass ...; fastcgi_param SCRIPT_FILENAME /path/to$fastcgi_script_name; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param QUERY_STRING $args; ... other fastcgi_param's } location @drupal { fastcgi_pass ...; fastcgi_param SCRIPT_FILENAME /path/to/index.php; fastcgi_param SCRIPT_NAME /index.php; fastcgi_param QUERY_STRING q=$uri&$args; ... other fastcgi_param's } </example> In the following example, <example> location / { try_files $uri $uri/ @drupal; } </example> the <code>try_files</code> directive is equivalent to <example> location / { error_page 404 = @drupal; log_not_found off; } </example> And here, <example> location ~ \.php$ { try_files $uri @drupal; fastcgi_pass ...; fastcgi_param SCRIPT_FILENAME /path/to$fastcgi_script_name; ... } </example> <code>try_files</code> checks the existence of the PHP file before passing the request to the FastCGI server. </para> <para> Example for Wordpress and Joomla: <example> location / { try_files $uri $uri/ @wordpress; } location ~ \.php$ { try_files $uri @wordpress; fastcgi_pass ...; fastcgi_param SCRIPT_FILENAME /path/to$fastcgi_script_name; ... other fastcgi_param's } location @wordpress { fastcgi_pass ...; fastcgi_param SCRIPT_FILENAME /path/to/index.php; ... other fastcgi_param's } </example> </para> </directive> <directive name="types"> <syntax>types { ... }</syntax> <default>see below</default> <context>http</context> <context>server</context> <context>location</context> <para> Maps file name extensions to MIME types of responses. Several extensions can map to one type. The following mappings are configured by default: <example> types { text/html html; image/gif gif; image/jpeg jpg; } </example> </para> <para> A sufficiently full mapping table is distributed with nginx in the <pathname>conf/mime.types</pathname> file. </para> <para> To make a particular location emit the <dq><code>application/octet-stream</code></dq> MIME type for all requests, try the following: <example> location /download/ { types { } default_type application/octet-stream; } </example> </para> </directive> <directive name="underscores_in_headers"> <syntax>underscores_in_headers <value>on</value> | <value>off</value></syntax> <default>underscores_in_headers off</default> <context>http</context> <context>server</context> <para> Enables or disables the use of underscores in client request header fields. </para> </directive> </section> <section id="variables" name="Embedded Variables"> <para> The module <code>ngx_http_core_module</code> supports embedded variables with names matching those of the Apache Server. First of all, these are variables representing client request header fields, such as, <var>$http_user_agent</var>, <var>$http_cookie</var>, and so on. It also supports other variables: <list type="tag"> <tag-name><var>$args</var></tag-name> <tag-desc> arguments in the request line </tag-desc> <tag-name><var>$arg_</var><argument>name</argument></tag-name> <tag-desc> argument <argument>name</argument> in the request line </tag-desc> <tag-name><var>$binary_remote_addr</var></tag-name> <tag-desc> client address in a binary form, value's length is always 4 bytes </tag-desc> <tag-name><var>$content_length</var></tag-name> <tag-desc> <header>Content-Length</header> request header field </tag-desc> <tag-name><var>$content_type</var></tag-name> <tag-desc> <header>Content-Type</header> request header field </tag-desc> <tag-name><var>$cookie_</var><argument>name</argument></tag-name> <tag-desc> the <argument>name</argument> cookie </tag-desc> <tag-name><var>$document_root</var></tag-name> <tag-desc> <link id="root">root</link> directive's value for the current request </tag-desc> <tag-name><var>$document_uri</var></tag-name> <tag-desc> same as <var>$uri</var> </tag-desc> <tag-name><var>$host</var></tag-name> <tag-desc> <header>Host</header> request header field, or the server name matching a request if this field is not present </tag-desc> <tag-name><var>$hostname</var></tag-name> <tag-desc> host name </tag-desc> <tag-name><var>$http_</var><argument>name</argument></tag-name> <tag-desc> the <argument>name</argument> request header field </tag-desc> <tag-name><var>$is_args</var></tag-name> <tag-desc> <dq><code>?</code></dq> if a request line has arguments, or an empty string otherwise </tag-desc> <tag-name><var>$limit_rate</var></tag-name> <tag-desc> allows for connection rate limiting </tag-desc> <tag-name><var>$pid</var></tag-name> <tag-desc> PID of the worker process </tag-desc> <tag-name><var>$request_method</var></tag-name> <tag-desc> request method, usually <dq><code>GET</code></dq> or <dq><code>POST</code></dq> </tag-desc> <tag-name><var>$remote_addr</var></tag-name> <tag-desc> client address </tag-desc> <tag-name><var>$remote_port</var></tag-name> <tag-desc> client port </tag-desc> <tag-name><var>$remote_user</var></tag-name> <tag-desc> user name supplied with the Basic authentication </tag-desc> <tag-name><var>$realpath_root</var></tag-name> <tag-desc> <link id="root">root</link> directive's value for the current request, with all symbolic links resolved to real paths </tag-desc> <tag-name><var>$request_filename</var></tag-name> <tag-desc> file path for the current query, based on the <link id="root">root</link> and <link id="alias">alias</link> directives, and the request URI </tag-desc> <tag-name><var>$request_body</var></tag-name> <tag-desc> request body <para> The variable's value is made available in locations processed by the <link doc="ngx_http_proxy_module.xml" id="proxy_pass">proxy_pass</link> and <link doc="ngx_http_fastcgi_module.xml" id="fastcgi_pass">fastcgi_pass</link> directives. </para> </tag-desc> <tag-name><var>$request_body_file</var></tag-name> <tag-desc> name of a temporary file with the request body <para> At the end of processing, the file needs to be removed. To always write a request body to a file, <link id="client_body_in_file_only">client_body_in_file_only on</link> needs be specified. When passing the name of a temporary file in a proxied request, or in a request to a FastCGI server, passing of the request body should be disabled by the <link doc="ngx_http_proxy_module.xml" id="proxy_pass_request_body">proxy_pass_request_body</link> and <link doc="ngx_http_fastcgi_module.xml" id="fastcgi_pass_request_body">fastcgi_pass_request_body</link> directives, respectively. </para> </tag-desc> <tag-name><var>$request_uri</var></tag-name> <tag-desc> full original request URI (with arguments) </tag-desc> <tag-name><var>$query_string</var></tag-name> <tag-desc> same as <var>$args</var> </tag-desc> <tag-name><var>$scheme</var></tag-name> <tag-desc> request scheme, <dq><code>http</code></dq> or <dq><code>https</code></dq> </tag-desc> <tag-name><var>$server_protocol</var></tag-name> <tag-desc> request protocol, usually <dq><code>HTTP/1.0</code></dq> or <dq><code>HTTP/1.1</code></dq> </tag-desc> <tag-name><var>$server_addr</var></tag-name> <tag-desc> an address of the server which accepted a request <para> Computing a value of this variable usually requires one system call. To avoid a system call, the <link id="listen">listen</link> directives must specify addresses and use the <parameter>bind</parameter> parameter </para> </tag-desc> <tag-name><var>$server_name</var></tag-name> <tag-desc> name of the server which accepted a request </tag-desc> <tag-name><var>$server_port</var></tag-name> <tag-desc> port of the server which accepted a request </tag-desc> <tag-name><var>$uri</var></tag-name> <tag-desc> current URI in request <para> It may differ from an original, e.g. when doing internal redirects, or when using index files. </para> </tag-desc> </list> </para> </section> </module>