Mercurial > hg > nginx-site
view xml/en/docs/stream/ngx_stream_upstream_module.xml @ 1879:3685d90e133e
Documented the "absolute_redirect" directive.
author | Yaroslav Zhuravlev <yar@nginx.com> |
---|---|
date | Mon, 26 Dec 2016 23:25:26 +0300 |
parents | 6f2c5a36b4d1 |
children | 6225d50b3cba |
line wrap: on
line source
<?xml version="1.0"?> <!-- Copyright (C) Nginx, Inc. --> <!DOCTYPE module SYSTEM "../../../../dtd/module.dtd"> <module name="Module ngx_stream_upstream_module" link="/en/docs/stream/ngx_stream_upstream_module.html" lang="en" rev="22"> <section id="summary"> <para> The <literal>ngx_stream_upstream_module</literal> module (1.9.0) is used to define groups of servers that can be referenced by the <link doc="ngx_stream_proxy_module.xml" id="proxy_pass"/> directive. </para> </section> <section id="example" name="Example Configuration"> <para> <example> upstream <emphasis>backend</emphasis> { hash $remote_addr consistent; server backend1.example.com:12345 weight=5; server backend2.example.com:12345; server unix:/tmp/backend3; server backup1.example.com:12345 backup; server backup2.example.com:12345 backup; } server { listen 12346; proxy_pass <emphasis>backend</emphasis>; } </example> </para> <para> Dynamically configurable group, available as part of our <commercial_version>commercial subscription</commercial_version>: <example> resolver 10.0.0.1; upstream <emphasis>dynamic</emphasis> { zone upstream_dynamic 64k; server backend1.example.com:12345 weight=5; server backend2.example.com:12345 fail_timeout=5s slow_start=30s; server 192.0.2.1:12345 max_fails=3; server backend3.example.com:12345 resolve; server backend4.example.com service=http resolve; server backup1.example.com:12345 backup; server backup2.example.com:12345 backup; } server { listen 12346; proxy_pass <emphasis>dynamic</emphasis>; health_check; } </example> </para> </section> <section id="directives" name="Directives"> <directive name="upstream"> <syntax block="yes"><value>name</value></syntax> <default/> <context>stream</context> <para> Defines a group of servers. Servers can listen on different ports. In addition, servers listening on TCP and UNIX-domain sockets can be mixed. </para> <para> Example: <example> upstream backend { server backend1.example.com:12345 weight=5; server 127.0.0.1:12345 max_fails=3 fail_timeout=30s; server unix:/tmp/backend2; server backend3.example.com:12345 resolve; server backup1.example.com:12345 backup; } </example> </para> <para> By default, connections are distributed between the servers using a weighted round-robin balancing method. In the above example, each 7 connections will be distributed as follows: 5 connections go to <literal>backend1.example.com:12345</literal> and one connection to each of the second and third servers. If an error occurs during communication with a server, the connection will be passed to the next server, and so on until all of the functioning servers will be tried. If communication with all servers fails, the connection will be closed. </para> </directive> <directive name="server"> <syntax><value>address</value> [<value>parameters</value>]</syntax> <default/> <context>upstream</context> <para> Defines the <value>address</value> and other <value>parameters</value> of a server. The address can be specified as a domain name or IP address with an obligatory port, or as a UNIX-domain socket path specified after the “<literal>unix:</literal>” prefix. A domain name that resolves to several IP addresses defines multiple servers at once. </para> <para> The following parameters can be defined: <list type="tag"> <tag-name id="weight"> <literal>weight</literal>=<value>number</value> </tag-name> <tag-desc> sets the weight of the server, by default, 1. </tag-desc> <tag-name id="max_conns"> <literal>max_conns</literal>=<value>number</value> </tag-name> <tag-desc> limits the maximum <value>number</value> of simultaneous connections to the proxied server (1.11.5). Default value is zero, meaning there is no limit. If the server group does not reside in the <link id="zone">shared memory</link>, the limitation works per each worker process. <note> Prior to version 1.11.5, this parameter was available as part of our <commercial_version>commercial subscription</commercial_version>. </note> </tag-desc> <tag-name id="max_fails"> <literal>max_fails</literal>=<value>number</value> </tag-name> <tag-desc> sets the number of unsuccessful attempts to communicate with the server that should happen in the duration set by the <literal>fail_timeout</literal> parameter to consider the server unavailable for a duration also set by the <literal>fail_timeout</literal> parameter. By default, the number of unsuccessful attempts is set to 1. The zero value disables the accounting of attempts. Here, an unsuccessful attempt is an error or timeout while establishing a connection with the server. </tag-desc> <tag-name id="fail_timeout"> <literal>fail_timeout</literal>=<value>time</value> </tag-name> <tag-desc> sets <list type="bullet"> <listitem> the time during which the specified number of unsuccessful attempts to communicate with the server should happen to consider the server unavailable; </listitem> <listitem> and the period of time the server will be considered unavailable. </listitem> </list> By default, the parameter is set to 10 seconds. </tag-desc> <tag-name id="backup"> <literal>backup</literal> </tag-name> <tag-desc> marks the server as a backup server. Connections to the backup server will be passed when the primary servers are unavailable. </tag-desc> <tag-name id="down"> <literal>down</literal> </tag-name> <tag-desc> marks the server as permanently unavailable. </tag-desc> </list> </para> <para> Additionally, the following parameters are available as part of our <commercial_version>commercial subscription</commercial_version>: <list type="tag"> <tag-name id="resolve"> <literal>resolve</literal> </tag-name> <tag-desc> monitors changes of the IP addresses that correspond to a domain name of the server, and automatically modifies the upstream configuration without the need of restarting nginx. The server group must reside in the <link id="zone">shared memory</link>. <para> In order for this parameter to work, the <link doc="ngx_stream_core_module.xml" id="resolver"/> directive must be specified in the <link doc="ngx_stream_core_module.xml" id="stream"/> block. Example: <example> stream { resolver 10.0.0.1; upstream u { zone ...; ... server example.com:12345 resolve; } } </example> </para> </tag-desc> <tag-name id="service"> <literal>service</literal>=<value>name</value> </tag-name> <tag-desc> enables resolving of DNS <link url="https://tools.ietf.org/html/rfc2782">SRV</link> records and sets the service <value>name</value> (1.9.13). In order for this parameter to work, it is necessary to specify the <link id="resolve"/> parameter for the server and specify a hostname without a port number. <para> If the service name does not contain a dot (“<literal>.</literal>”), then the <link url="https://tools.ietf.org/html/rfc2782">RFC</link>-compliant name is constructed and the TCP protocol is added to the service prefix. For example, to look up the <literal>_http._tcp.backend.example.com</literal> SRV record, it is necessary to specify the directive: <example> server backend.example.com service=http resolve; </example> If the service name contains one or more dots, then the name is constructed by joining the service prefix and the server name. For example, to look up the <literal>_http._tcp.backend.example.com</literal> and <literal>server1.backend.example.com</literal> SRV records, it is necessary to specify the directives: <example> server backend.example.com service=_http._tcp resolve; server example.com service=server1.backend resolve; </example> </para> <para> Highest-priority SRV records (records with the same lowest-number priority value) are resolved as primary servers, the rest of SRV records are resolved as backup servers. If the <link id="backup"/> parameter is specified for the server, high-priority SRV records are resolved as backup servers, the rest of SRV records are ignored. </para> </tag-desc> <tag-name id="slow_start"> <literal>slow_start</literal>=<value>time</value> </tag-name> <tag-desc> sets the <value>time</value> during which the server will recover its weight from zero to a nominal value, when unhealthy server becomes <link id="health_check">healthy</link>, or when the server becomes available after a period of time it was considered <link id="fail_timeout">unavailable</link>. Default value is zero, i.e. slow start is disabled. <note> The parameter cannot be used along with the <link id="hash"/> load balancing method. </note> </tag-desc> </list> </para> <para> <note> If there is only a single server in a group, <literal>max_fails</literal>, <literal>fail_timeout</literal> and <literal>slow_start</literal> parameters are ignored, and such a server will never be considered unavailable. </note> </para> </directive> <directive name="zone"> <syntax><value>name</value> [<value>size</value>]</syntax> <default/> <context>upstream</context> <para> Defines the <value>name</value> and <value>size</value> of the shared memory zone that keeps the group’s configuration and run-time state that are shared between worker processes. Several groups may share the same zone. In this case, it is enough to specify the zone size only once. </para> <para> Additionally, as part of our <commercial_version>commercial subscription</commercial_version>, such groups allow changing the group membership or modifying the settings of a particular server without the need of restarting nginx. The configuration is accessible via a special location handled by <link doc="../http/ngx_http_upstream_conf_module.xml" id="upstream_conf"/>. </para> </directive> <directive name="state"> <syntax><value>file</value></syntax> <default/> <context>upstream</context> <appeared-in>1.9.7</appeared-in> <para> Specifies a <value>file</value> that keeps the state of the dynamically configurable group. </para> <para> Examples: <example> state /var/lib/nginx/state/servers.conf; # path for Linux state /var/db/nginx/state/servers.conf; # path for FreeBSD </example> </para> <para> The state is currently limited to the list of servers with their parameters. The file is read when parsing the configuration and is updated each time the upstream configuration is <link doc="ngx_http_upstream_conf_module.xml" id="upstream_conf">changed</link>. Changing the file content directly should be avoided. The directive cannot be used along with the <link id="server"/> directive. </para> <para> <note> Changes made during <link doc="../control.xml" id="reconfiguration">configuration reload</link> or <link doc="../control.xml" id="upgrade">binary upgrade</link> can be lost. </note> </para> <para> <note> This directive is available as part of our <commercial_version>commercial subscription</commercial_version>. </note> </para> </directive> <directive name="hash"> <syntax><value>key</value> [<literal>consistent</literal>]</syntax> <default/> <context>upstream</context> <para> Specifies a load balancing method for a server group where client-server mapping is based on the hashed <value>key</value> value. The <value>key</value> can contain text, variables, and their combinations (1.11.2). Usage example: <example> hash $remote_addr; </example> Note that adding or removing a server from the group may result in remapping most of the keys to different servers. The method is compatible with the <link url="http://search.cpan.org/perldoc?Cache%3A%3AMemcached">Cache::Memcached</link> Perl library. </para> <para> If the <literal>consistent</literal> parameter is specified, the <link url="http://www.last.fm/user/RJ/journal/2007/04/10/392555/">ketama</link> consistent hashing method will be used instead. The method ensures that only a few keys will be remapped to different servers when a server is added to or removed from the group. This helps to achieve a higher cache hit ratio for caching servers. The method is compatible with the <link url="http://search.cpan.org/perldoc?Cache%3A%3AMemcached%3A%3AFast">Cache::Memcached::Fast</link> Perl library with the <value>ketama_points</value> parameter set to 160. </para> </directive> <directive name="least_conn"> <syntax/> <default/> <context>upstream</context> <para> Specifies that a server group should use a load balancing method where a connection is passed to the server with the least number of active connections, taking into account weights of servers. If there are several such servers, they are tried in turn using a weighted round-robin balancing method. </para> </directive> <directive name="least_time"> <syntax><literal>connect</literal> | <literal>first_byte</literal> | <literal>last_byte</literal></syntax> <default/> <context>upstream</context> <para> Specifies that a group should use a load balancing method where a connection is passed to the server with the least average time and least number of active connections, taking into account weights of servers. If there are several such servers, they are tried in turn using a weighted round-robin balancing method. </para> <para> If the <literal>connect</literal> parameter is specified, time to connect to the upstream server is used. If the <literal>first_byte</literal> parameter is specified, time to receive the first byte of data is used. If the <literal>last_byte</literal> is specified, time to receive the last byte of data is used. </para> <para> <note> This directive is available as part of our <commercial_version>commercial subscription</commercial_version>. </note> </para> </directive> <directive name="health_check"> <syntax>[<value>parameters</value>]</syntax> <default/> <context>server</context> <para> Enables periodic health checks of the servers in a <link id="upstream">group</link>. </para> <para> The following optional parameters are supported: <list type="tag"> <tag-name id="interval"> <literal>interval</literal>=<value>time</value> </tag-name> <tag-desc> sets the interval between two consecutive health checks, by default, 5 seconds; </tag-desc> <tag-name id="health_check_jitter"> <literal>jitter</literal>=<value>time</value> </tag-name> <tag-desc> sets the time within which each health check will be randomly delayed, by default, there is no delay; </tag-desc> <tag-name id="fails"> <literal>fails</literal>=<value>number</value> </tag-name> <tag-desc> sets the number of consecutive failed health checks of a particular server after which this server will be considered unhealthy, by default, 1; </tag-desc> <tag-name id="passes"> <literal>passes</literal>=<value>number</value> </tag-name> <tag-desc> sets the number of consecutive passed health checks of a particular server after which the server will be considered healthy, by default, 1; </tag-desc> <tag-name id="hc_match"> <literal>match</literal>=<value>name</value> </tag-name> <tag-desc> specifies the <literal>match</literal> block configuring the tests that a successful connection should pass in order for a health check to pass. By default, only the ability to establish a TCP connection with the server is checked; </tag-desc> <tag-name id="health_check_port"> <literal>port</literal>=<value>number</value> </tag-name> <tag-desc> defines the port used when connecting to a server to perform a health check (1.9.7); by default, equals the <link id="server"/> port; </tag-desc> <tag-name id="health_check_udp"> <literal>udp</literal> </tag-name> <tag-desc> specifies that the <literal>UDP</literal> protocol should be used for health checks instead of the default <literal>TCP</literal> protocol (1.9.13); requires a <link id="hc_match">match</link> block with the <link id="match_send">send</link> and <link id="match_expect">expect</link> parameters. </tag-desc> </list> </para> <para> For example, <example> server { proxy_pass backend; health_check; } </example> will check the ability to establish a TCP connection to each server in the <literal>backend</literal> group every five seconds. When a connection to the server cannot be established, the health check will fail, and the server will be considered unhealthy. Client connections are not passed to unhealthy servers. </para> <para> Health checks can also be configured to test data obtained from the server. Tests are configured separately using the <link id="match"/> directive and referenced in the <literal>match</literal> parameter. </para> <para> The server group must reside in the <link id="zone">shared memory</link>. </para> <para> If several health checks are defined for the same group of servers, a single failure of any check will make the corresponding server be considered unhealthy. </para> <para> <note> This directive is available as part of our <commercial_version>commercial subscription</commercial_version>. </note> </para> </directive> <directive name="health_check_timeout"> <syntax><value>timeout</value></syntax> <default>5s</default> <context>stream</context> <context>server</context> <para> Overrides the <link doc="ngx_stream_proxy_module.xml" id="proxy_timeout"/> value for health checks. </para> <para> <note> This directive is available as part of our <commercial_version>commercial subscription</commercial_version>. </note> </para> </directive> <directive name="match"> <syntax block="yes"><value>name</value> </syntax> <default/> <context>stream</context> <para> Defines the named test set used to verify server responses to health checks. </para> <para> The following parameters can be configured: <list type="tag"> <tag-name id="match_send"> <literal>send</literal> <value>string</value>; </tag-name> <tag-desc> sends a <value>string</value> to the server; </tag-desc> <tag-name id="match_expect"> <literal>expect</literal> <value>string</value> | <literal>~</literal> <value>regex</value>; </tag-name> <tag-desc> a literal string (1.9.12) or a regular expression that the data obtained from the server should match. The regular expression is specified with the preceding “<literal>~*</literal>” modifier (for case-insensitive matching), or the “<literal>~</literal>” modifier (for case-sensitive matching). </tag-desc> </list> Both <literal>send</literal> and <literal>expect</literal> parameters can contain hexadecimal literals with the prefix “<literal>\x</literal>” followed by two hex digits, for example, “<literal>\x80</literal>” (1.9.12). </para> <para> Health check is passed if: <list type="bullet"> <listitem> the TCP connection was successfully established; </listitem> <listitem> the <value>string</value> from the <literal>send</literal> parameter, if specified, was sent; </listitem> <listitem> the data obtained from the server matched the string or regular expression from the <literal>expect</literal> parameter, if specified; </listitem> <listitem> the time elapsed does not exceed the value specified in the <link id="health_check_timeout"/> directive. </listitem> </list> </para> <para> Example: <example> upstream backend { zone upstream_backend 10m; server 127.0.0.1:12345; } match http { send "GET / HTTP/1.0\r\nHost: localhost\r\n\r\n"; expect ~ "200 OK"; } server { listen 12346; proxy_pass backend; health_check match=http; } </example> </para> <para> <note> Only the first <link doc="ngx_stream_proxy_module.xml" id="proxy_buffer_size"/> bytes of data obtained from the server are examined. </note> </para> <para> <note> This directive is available as part of our <commercial_version>commercial subscription</commercial_version>. </note> </para> </directive> </section> <section id="variables" name="Embedded Variables"> <para> The <literal>ngx_stream_upstream_module</literal> module supports the following embedded variables: <list type="tag"> <tag-name id="var_upstream_addr"><var>$upstream_addr</var></tag-name> <tag-desc> keeps the IP address and port, or the path to the UNIX-domain socket of the upstream server (1.11.4). If several servers were contacted during proxying, their addresses are separated by commas, e.g. “<literal>192.168.1.1:12345, 192.168.1.2:12345, unix:/tmp/sock</literal>”. </tag-desc> <tag-name id="var_upstream_bytes_sent"><var>$upstream_bytes_sent</var></tag-name> <tag-desc> number of bytes sent to an upstream server (1.11.4). Values from several connections are separated by commas like addresses in the <link id="var_upstream_addr">$upstream_addr</link> variable. </tag-desc> <tag-name id="var_upstream_bytes_received"><var>$upstream_bytes_received</var></tag-name> <tag-desc> number of bytes received from an upstream server (1.11.4). Values from several connections are separated by commas like addresses in the <link id="var_upstream_addr">$upstream_addr</link> variable. </tag-desc> <tag-name id="var_upstream_connect_time"><var>$upstream_connect_time</var></tag-name> <tag-desc> time to connect to the upstream server (1.11.4); the time is kept in seconds with millisecond resolution. Times of several connections are separated by commas like addresses in the <link id="var_upstream_addr">$upstream_addr</link> variable. </tag-desc> <tag-name id="var_upstream_first_byte_time"><var>$upstream_first_byte_time</var></tag-name> <tag-desc> time to receive the first byte of data (1.11.4); the time is kept in seconds with millisecond resolution. Times of several connections are separated by commas like addresses in the <link id="var_upstream_addr">$upstream_addr</link> variable. </tag-desc> <tag-name id="var_upstream_session_time"><var>$upstream_session_time</var></tag-name> <tag-desc> session duration in seconds with millisecond resolution (1.11.4). Times of several connections are separated by commas like addresses in the <link id="var_upstream_addr">$upstream_addr</link> variable. </tag-desc> </list> </para> </section> </module>