Mercurial > hg > nginx-site
view xml/en/docs/stream/ngx_stream_ssl_module.xml @ 1879:3685d90e133e
Documented the "absolute_redirect" directive.
author | Yaroslav Zhuravlev <yar@nginx.com> |
---|---|
date | Mon, 26 Dec 2016 23:25:26 +0300 |
parents | aa29a64a5e9d |
children | 66a30a380fba |
line wrap: on
line source
<?xml version="1.0"?> <!-- Copyright (C) Nginx, Inc. --> <!DOCTYPE module SYSTEM "../../../../dtd/module.dtd"> <module name="Module ngx_stream_ssl_module" link="/en/docs/stream/ngx_stream_ssl_module.html" lang="en" rev="15"> <section id="summary"> <para> The <literal>ngx_stream_ssl_module</literal> module (1.9.0) provides the necessary support for a stream proxy server to work with the SSL/TLS protocol. This module is not built by default, it should be enabled with the <literal>--with-stream_ssl_module</literal> configuration parameter. </para> </section> <section id="example" name="Example Configuration"> <para> To reduce the processor load, it is recommended to <list type="bullet"> <listitem> set the number of worker processes equal to the number of processors, </listitem> <listitem> enable the shared session cache, </listitem> <listitem> disable the built-in session cache, </listitem> <listitem> and possibly increase the session lifetime (by default, 5 minutes): </listitem> </list> <example> <emphasis>worker_processes auto;</emphasis> stream { ... server { listen 12345 ssl; ssl_protocols TLSv1 TLSv1.1 TLSv1.2; ssl_ciphers AES128-SHA:AES256-SHA:RC4-SHA:DES-CBC3-SHA:RC4-MD5; ssl_certificate /usr/local/nginx/conf/cert.pem; ssl_certificate_key /usr/local/nginx/conf/cert.key; <emphasis>ssl_session_cache shared:SSL:10m;</emphasis> <emphasis>ssl_session_timeout 10m;</emphasis> ... } </example> </para> </section> <section id="directives" name="Directives"> <directive name="ssl_certificate"> <syntax><value>file</value></syntax> <default/> <context>stream</context> <context>server</context> <para> Specifies a <value>file</value> with the certificate in the PEM format for the given server. If intermediate certificates should be specified in addition to a primary certificate, they should be specified in the same file in the following order: the primary certificate comes first, then the intermediate certificates. A secret key in the PEM format may be placed in the same file. </para> <para> Since version 1.11.0, this directive can be specified multiple times to load certificates of different types, for example, RSA and ECDSA: <example> server { listen 12345 ssl; ssl_certificate example.com.rsa.crt; ssl_certificate_key example.com.rsa.key; ssl_certificate example.com.ecdsa.crt; ssl_certificate_key example.com.ecdsa.key; ... } </example> <note> Only OpenSSL 1.0.2 or higher supports separate certificate chains for different certificates. With older versions, only one certificate chain can be used. </note> </para> </directive> <directive name="ssl_certificate_key"> <syntax><value>file</value></syntax> <default/> <context>stream</context> <context>server</context> <para> Specifies a <value>file</value> with the secret key in the PEM format for the given server. </para> <para> The value <literal>engine</literal>:<value>name</value>:<value>id</value> can be specified instead of the <value>file</value>, which loads a secret key with a specified <value>id</value> from the OpenSSL engine <value>name</value>. </para> </directive> <directive name="ssl_ciphers"> <syntax><value>ciphers</value></syntax> <default>HIGH:!aNULL:!MD5</default> <context>stream</context> <context>server</context> <para> Specifies the enabled ciphers. The ciphers are specified in the format understood by the OpenSSL library, for example: <example> ssl_ciphers ALL:!aNULL:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP; </example> </para> <para> The full list can be viewed using the “<command>openssl ciphers</command>” command. </para> </directive> <directive name="ssl_client_certificate"> <syntax><value>file</value></syntax> <default/> <context>stream</context> <context>server</context> <appeared-in>1.11.8</appeared-in> <para> Specifies a <value>file</value> with trusted CA certificates in the PEM format used to <link id="ssl_verify_client">verify</link> client certificates. </para> <para> The list of certificates will be sent to clients. If this is not desired, the <link id="ssl_trusted_certificate"/> directive can be used. </para> </directive> <directive name="ssl_crl"> <syntax><value>file</value></syntax> <default/> <context>stream</context> <context>server</context> <appeared-in>1.11.8</appeared-in> <para> Specifies a <value>file</value> with revoked certificates (CRL) in the PEM format used to <link id="ssl_verify_client">verify</link> client certificates. </para> </directive> <directive name="ssl_dhparam"> <syntax><value>file</value></syntax> <default/> <context>stream</context> <context>server</context> <para> Specifies a <value>file</value> with DH parameters for DHE ciphers. </para> </directive> <directive name="ssl_ecdh_curve"> <syntax><value>curve</value></syntax> <default>auto</default> <context>stream</context> <context>server</context> <para> Specifies a <value>curve</value> for ECDHE ciphers. </para> <para> When using OpenSSL 1.0.2 or higher, it is possible to specify multiple curves (1.11.0), for example: <example> ssl_ecdh_curve prime256v1:secp384r1; </example> </para> <para> The special value <literal>auto</literal> (1.11.0) instructs nginx to use a list built into the OpenSSL library when using OpenSSL 1.0.2 or higher, or <literal>prime256v1</literal> with older versions. </para> <para> <note> Prior to version 1.11.0, the <literal>prime256v1</literal> curve was used by default. </note> </para> </directive> <directive name="ssl_handshake_timeout"> <syntax><value>time</value></syntax> <default>60s</default> <context>stream</context> <context>server</context> <para> Specifies a timeout for the SSL handshake to complete. </para> </directive> <directive name="ssl_password_file"> <syntax><value>file</value></syntax> <default/> <context>stream</context> <context>server</context> <para> Specifies a <value>file</value> with passphrases for <link id="ssl_certificate_key">secret keys</link> where each passphrase is specified on a separate line. Passphrases are tried in turn when loading the key. </para> <para> Example: <example> stream { ssl_password_file /etc/keys/global.pass; ... server { listen 127.0.0.1:12345; ssl_certificate_key /etc/keys/first.key; } server { listen 127.0.0.1:12346; # named pipe can also be used instead of a file ssl_password_file /etc/keys/fifo; ssl_certificate_key /etc/keys/second.key; } } </example> </para> </directive> <directive name="ssl_prefer_server_ciphers"> <syntax><literal>on</literal> | <literal>off</literal></syntax> <default>off</default> <context>stream</context> <context>server</context> <para> Specifies that server ciphers should be preferred over client ciphers when the SSLv3 and TLS protocols are used. </para> </directive> <directive name="ssl_protocols"> <syntax> [<literal>SSLv2</literal>] [<literal>SSLv3</literal>] [<literal>TLSv1</literal>] [<literal>TLSv1.1</literal>] [<literal>TLSv1.2</literal>]</syntax> <default>TLSv1 TLSv1.1 TLSv1.2</default> <context>stream</context> <context>server</context> <para> Enables the specified protocols. The <literal>TLSv1.1</literal> and <literal>TLSv1.2</literal> parameters work only when the OpenSSL library of version 1.0.1 or higher is used. </para> </directive> <directive name="ssl_session_cache"> <syntax> <literal>off</literal> | <literal>none</literal> | [<literal>builtin</literal>[:<value>size</value>]] [<literal>shared</literal>:<value>name</value>:<value>size</value>]</syntax> <default>none</default> <context>stream</context> <context>server</context> <para> Sets the types and sizes of caches that store session parameters. A cache can be of any of the following types: <list type="tag"> <tag-name><literal>off</literal></tag-name> <tag-desc> the use of a session cache is strictly prohibited: nginx explicitly tells a client that sessions may not be reused. </tag-desc> <tag-name><literal>none</literal></tag-name> <tag-desc> the use of a session cache is gently disallowed: nginx tells a client that sessions may be reused, but does not actually store session parameters in the cache. </tag-desc> <tag-name><literal>builtin</literal></tag-name> <tag-desc> a cache built in OpenSSL; used by one worker process only. The cache size is specified in sessions. If size is not given, it is equal to 20480 sessions. Use of the built-in cache can cause memory fragmentation. </tag-desc> <tag-name><literal>shared</literal></tag-name> <tag-desc> a cache shared between all worker processes. The cache size is specified in bytes; one megabyte can store about 4000 sessions. Each shared cache should have an arbitrary name. A cache with the same name can be used in several servers. </tag-desc> </list> </para> <para> Both cache types can be used simultaneously, for example: <example> ssl_session_cache builtin:1000 shared:SSL:10m; </example> but using only shared cache without the built-in cache should be more efficient. </para> </directive> <directive name="ssl_session_ticket_key"> <syntax><value>file</value></syntax> <default/> <context>stream</context> <context>server</context> <para> Sets a <value>file</value> with the secret key used to encrypt and decrypt TLS session tickets. The directive is necessary if the same key has to be shared between multiple servers. By default, a randomly generated key is used. </para> <para> If several keys are specified, only the first key is used to encrypt TLS session tickets. This allows configuring key rotation, for example: <example> ssl_session_ticket_key current.key; ssl_session_ticket_key previous.key; </example> </para> <para> The <value>file</value> must contain 80 or 48 bytes of random data and can be created using the following command: <example> openssl rand 80 > ticket.key </example> Depending on the file size either AES256 (for 80-byte keys, 1.11.8) or AES128 (for 48-byte keys) is used for encryption. </para> </directive> <directive name="ssl_session_tickets"> <syntax><literal>on</literal> | <literal>off</literal></syntax> <default>on</default> <context>stream</context> <context>server</context> <para> Enables or disables session resumption through <link url="http://tools.ietf.org/html/rfc5077">TLS session tickets</link>. </para> </directive> <directive name="ssl_session_timeout"> <syntax><value>time</value></syntax> <default>5m</default> <context>stream</context> <context>server</context> <para> Specifies a time during which a client may reuse the session parameters. </para> </directive> <directive name="ssl_trusted_certificate"> <syntax><value>file</value></syntax> <default/> <context>stream</context> <context>server</context> <appeared-in>1.11.8</appeared-in> <para> Specifies a <value>file</value> with trusted CA certificates in the PEM format used to <link id="ssl_verify_client">verify</link> client certificates. </para> <para> In contrast to the certificate set by <link id="ssl_client_certificate"/>, the list of these certificates will not be sent to clients. </para> </directive> <directive name="ssl_verify_client"> <syntax> <literal>on</literal> | <literal>off</literal> | <literal>optional</literal> | <literal>optional_no_ca</literal></syntax> <default>off</default> <context>stream</context> <context>server</context> <appeared-in>1.11.8</appeared-in> <para> Enables verification of client certificates. The verification result is stored in the <link id="var_ssl_client_verify">$ssl_client_verify</link> variable. If an error has occurred during the client certificate verification or a client has not presented the required certificate, the connection is closed. </para> <para> The <literal>optional</literal> parameter requests the client certificate and verifies it if the certificate is present. </para> <para> The <literal>optional_no_ca</literal> parameter requests the client certificate but does not require it to be signed by a trusted CA certificate. This is intended for the use in cases when a service that is external to nginx performs the actual certificate verification. The contents of the certificate is accessible through the <link id="var_ssl_client_cert">$ssl_client_cert</link> variable. </para> </directive> <directive name="ssl_verify_depth"> <syntax><value>number</value></syntax> <default>1</default> <context>stream</context> <context>server</context> <appeared-in>1.11.8</appeared-in> <para> Sets the verification depth in the client certificates chain. </para> </directive> </section> <section id="variables" name="Embedded Variables"> <para> The <literal>ngx_stream_ssl_module</literal> module supports variables since 1.11.2. <list type="tag"> <tag-name id="var_ssl_cipher"><var>$ssl_cipher</var></tag-name> <tag-desc> returns the string of ciphers used for an established SSL connection; </tag-desc> <tag-name id="var_ssl_ciphers"><var>$ssl_ciphers</var></tag-name> <tag-desc> returns the list of ciphers supported by the client (1.11.7). Known ciphers are listed by names, unknown are shown in hexadecimal, for example: <example> AES128-SHA:AES256-SHA:0x00ff </example> <note> The variable is fully supported only when using OpenSSL version 1.0.2 or higher. With older versions, the variable is available only for new sessions and lists only known ciphers. </note> </tag-desc> <tag-name id="var_ssl_client_cert"><var>$ssl_client_cert</var></tag-name> <tag-desc> returns the client certificate in the PEM format for an established SSL connection, with each line except the first prepended with the tab character (1.11.8); </tag-desc> <tag-name id="var_ssl_client_fingerprint"><var>$ssl_client_fingerprint</var></tag-name> <tag-desc> returns the SHA1 fingerprint of the client certificate for an established SSL connection (1.11.8); </tag-desc> <tag-name id="var_ssl_client_i_dn"><var>$ssl_client_i_dn</var></tag-name> <tag-desc> returns the “issuer DN” string of the client certificate for an established SSL connection according to <link url="https://tools.ietf.org/html/rfc2253">RFC 2253</link> (1.11.8); </tag-desc> <tag-name id="var_ssl_client_raw_cert"><var>$ssl_client_raw_cert</var> </tag-name> <tag-desc> returns the client certificate in the PEM format for an established SSL connection (1.11.8); </tag-desc> <tag-name id="var_ssl_client_s_dn"><var>$ssl_client_s_dn</var></tag-name> <tag-desc> returns the “subject DN” string of the client certificate for an established SSL connection according to <link url="https://tools.ietf.org/html/rfc2253">RFC 2253</link> (1.11.8); </tag-desc> <tag-name id="var_ssl_client_serial"><var>$ssl_client_serial</var></tag-name> <tag-desc> returns the serial number of the client certificate for an established SSL connection (1.11.8); </tag-desc> <tag-name id="var_ssl_client_v_end"><var>$ssl_client_v_end</var></tag-name> <tag-desc> returns the end date of the client certificate (1.11.8); </tag-desc> <tag-name id="var_ssl_client_v_remain"><var>$ssl_client_v_remain</var></tag-name> <tag-desc> returns the number of days until the client certificate expires (1.11.8); </tag-desc> <tag-name id="var_ssl_client_v_start"><var>$ssl_client_v_start</var></tag-name> <tag-desc> returns the start date of the client certificate (1.11.8); </tag-desc> <tag-name id="var_ssl_client_verify"><var>$ssl_client_verify</var></tag-name> <tag-desc> returns the result of client certificate verification (1.11.8): “<literal>SUCCESS</literal>”, “<literal>FAILED:</literal><value>reason</value>”, and “<literal>NONE</literal>” if a certificate was not present; </tag-desc> <tag-name id="var_ssl_curves"><var>$ssl_curves</var></tag-name> <tag-desc> returns the list of curves supported by the client (1.11.7). Known curves are listed by names, unknown are shown in hexadecimal, for example: <example> 0x001d:prime256v1:secp521r1:secp384r1 </example> <note> The variable is supported only when using OpenSSL version 1.0.2 or higher. With older versions, the variable value will be an empty string. </note> <note> The variable is available only for new sessions. </note> </tag-desc> <tag-name id="var_ssl_protocol"><var>$ssl_protocol</var></tag-name> <tag-desc> returns the protocol of an established SSL connection; </tag-desc> <tag-name id="var_ssl_server_name"><var>$ssl_server_name</var></tag-name> <tag-desc> returns the server name requested through <link url="http://en.wikipedia.org/wiki/Server_Name_Indication">SNI</link>; </tag-desc> <tag-name id="var_ssl_session_id"><var>$ssl_session_id</var></tag-name> <tag-desc> returns the session identifier of an established SSL connection; </tag-desc> <tag-name id="var_ssl_session_reused"><var>$ssl_session_reused</var></tag-name> <tag-desc> returns “<literal>r</literal>” if an SSL session was reused, or “<literal>.</literal>” otherwise. </tag-desc> </list> </para> </section> </module>